Bricked Galaxy Note N7000 ,Don’t Worry Here is a Easy Solution Just follow it..

You won’t see nothing on the screen because the bootloader is wrong…..

Remove Phone Battery & Again put the battery in then do following.

  1. Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
    to instal kies click here
  2. hold “vol down”+”home”+”power” for 15 seconds…
  3. release then press “volume up”.
    Note: Don’t worry about seeing anything on the screen or any keys light
    it will be blank this is because bootloader is incorrect.
  4. open odin you should see comxx in listed flash the original bootloader back
    into phone this will/should resume visual display.
  5. Wait 10 seconds.. Remove Battery Then Boot Back into Bootloader following steps “2&3”
  6. Extract zip file (Download link given below). Put the phone into download mode (vol. down+home+power buttons),
  7. Then Again connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
    Make sure that only two boxes are checked in odin – “Auto Reboot” and “F.Reset Time”.(See Image)
    If your downloaded file contains Single files
    Choose PDA button in Odin and select tar file you extracted before. (see 1st Image)
    If your downloaded file contains multifiles
    Choose CODE in PDA, MODEM in PHONE, Multi CSC in CSC(see 2nd Image)
  8. Choose START button.
    The phone will reboot after the flash. Done.


Download Link :

Any Kind Of Damages I am not Responsible. Do At your own risk.

Credit: Xda